A dual-row tracker built around one precise axis.
A dual-row horizontal tracker that follows the sun's east-west path with precision motorization and a low-profile design for maximum stability.
2P-HSATHorizontal Single Axis Tracker
A dual-row horizontal tracker that follows the sun's east-west path with precision motorization and a low-profile design for maximum stability.
Selected component: Drive System. Single point linear actuator, 24V DC motor.
Why plants specify the 2P-HSAT.
01
Increases energy output by 15–25% over fixed-tilt
02
Wind-resistant up to 180 km/h
03
Ideal for flat terrains and bifacial modules
04
Cost-effective land use with shared drive systems
1P and 2P, one drive philosophy.
Both configurations share the same single-point drive system and control electronics. The difference is how the modules are arranged.
- Module arrangement
- Two modules in portrait per row
- Tracker configuration
- Horizontal single axis tracker (HSAT)
- Terrain suitability
- Flat terrain; 10% N–S and 10% E–W slope
- Advantages
- Cost-effective land use with shared drive systems
Up to 100 modules on one axis.
Commercial and bifacial modules are both supported, in single- or dual-portrait arrangement along a 50 m to 100 m tracker.
- Modules per tracker
- Up to 100 modules
- Module support
- Commercial & bifacial
- Arrangement
- Two in portrait (2P) or one in portrait (1P)
- Tracker length
- 50 m – 100 m
- Ground coverage ratio
- >15%
Founded for the ground it stands on.
Ramming, pre-drill or PHC piles at roughly 450 piles per MW, with galvanized or Mg-Zn coated steel for corrosion resistance.
- Foundation methods
- Ramming / pre-drill / PHC
- Anti-corrosion
- Galvanized / Mg-Zn coated
- Piles per MW
- ~450
- Operating temperature
- -15°C to 60°C
The full feature set.
10% N–S Slope
Adapts to north-south terrain gradients
10% E–W Slope
Handles undulating east-west ground
±45° to ±60° Tilt
Wide rotation range for maximum capture
1P & 2P Configs
Single or dual-row portrait layouts
180 km/h Stow
0° stow position in extreme wind
Backtracking
Eliminates row-to-row shading (3D optional)
Bifacial Compatible
Captures reflected irradiance on the rear face
Easy Maintenance
Accessible drive and controller hardware

Design specification.
Design Specification
10 rows- Tracking Type
- HSAT 2P & TSAT 1P
- Drive Type
- Single point linear actuator
- Motor Type
- 24V DC Motor
- Tracker Length
- 50m – 100m
- Module Number
- Up to 100 modules
- Ground Coverage Ratio
- >15%
- Modules Support
- Commercial & Bifacial
- Operating Temperature
- -15°C to 60°C
- Foundation
- Ramming / Pre-drill / PHC
- Anti-Corrosion
- Galvanized / Mg-Zn Coated
Let's build the future of solar.
Have a project in mind? Talk to our team about your solar tracking requirements.