The engineering behind every degree.
Tracking is a control problem, a mechanical problem and a survival problem at once. Here is how each one is solved.
Fixed-tilt panels stay in one position all day. Trackers continuously adjust their orientation toward the sun.
Astronomical, then intelligent.
The tracking algorithm is astronomical + intelligent: the sun's position is calculated, then the controller continuously derives the required tracker angle and holds it to ±2°.
One controller is deployed per tracker, so each row is commanded independently rather than driven from a single plant-wide position.
One actuator. One axis.
Motion comes from a single point linear actuator powered by a 24V DC motor, rotating the structure through a ±45° to ±60° range.
The low-profile dual-row structure is galvanized or Mg-Zn coated for corrosion resistance, founded on ramming, pre-drill or PHC piles.
Backtracking removes row shading.
Backtracking is supported, with a 3D option, so early-morning and late-afternoon rows step back off their neighbours instead of shading them.
Across a full day this widens the generation curve, delivering 15–25% more energy than a fixed-tilt system.
Stow, survive, and follow the ground.
In extreme wind the tracker moves to a 0° stow position, rated for survival at 180 km/h. Nighttime stow runs on schedule.
Installation tolerates 10% north–south and 10% east–west slope, with a ground coverage ratio above 15% and operation from -15°C to 60°C.
Three ways to reach the tracker.
Zigbee mesh
Wireless mesh communication between trackers.
Ethernet
Wired plant-level communication.
RS485
Serial communication support.
Let's build the future of solar.
Have a project in mind? Talk to our team about your solar tracking requirements.